Saniflo - Sanipro Macerator

Email to a Friend

Product Description

SaniPro - designed to enable the addition of an en-suite shower room, Sanipro will take the waste from a WC, shower and wash basin and pump it quickly and quietly through 22mm small bore pipework to a remote soil stack or sewer.
Sanipro has also recently received the ‘silent’ makeover and been fitted with an integrated carbon filter in its elegant new casing.

Motor: induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
Watts (consumption): 400w
Electrical supply: 220-240V 50Hz
Flow rate at max head l/min: 55
Discharge: (vertical height is measured from floor level) horizontally to 100 metres or vertically to 5 metres
Gravity fall on ‘horizontal’ installations: 1/200
Discharge Pipe Diameter: 22mm
Construction Materials: Polypropylene, C.R.P., stainless steel, Neoprene
Type of WC Pan: (not included)
short spigot 100mm HO outlet (BS EN 33/37)
Motor RPM: 2800 RPM
Normal Running Time WC: 10–20 secs approx or as required, to discharge shower etc
Dimensions: 413W x 265 O/H x 178D (requires 200mm behind spigot)

Please note: The dimensions shown here are of the unit only and do not allow for these additional space requirements as they may differ for each installation. It is the responsibility of the purchaser or installer to ensure that the Saniflo product selected will fit in the chosen place of installation with due allowance for pipework runs, electrical connections etc.

Availability | See more Saniflo products | See more Saniflo