Bristan Hydropower Duraspeed Shower Booster Pump 70

Variable speed twin impeller 2.0 bar pump - gravity systems only

Email to a Friend

Product Description

If your home has low water pressure installing a shower pump to your existing shower can provide the extra boost you need for a better shower experience.

Complete with a 2 year guarantee this Bristan Hydropower Water Pump 70 also has a 2.0 bar rating.

Specifications for the c

• Variable speed twin impeller 2.0 bar pump
• Includes variable speed control for flow and pressure adjustment
• Suitable for gravity systems only
  
• Dimensions: 260(w) x 190(h)mm
  
• Construction: Acetal plastic casting
  
• Inlet connection: Flexible hose - 15mm push fit
  
• Outlet Connection: Flexible hose - 15mm push fit
  
• Pump rated at 2.0 bar pressure equivalent to 20 metres (70' head)
  
• Stalled Pressure: 1.9 bar
  
• Supplied with four flexible connectors with push fittings.
  
• Article Code: HY PUMP70
  
• Additional Information:
  
• Motor Rating: 15 minutes on and 60 minutes off.
  
• Twin impeller for boosting two water supplies
• Vibration free and gives noise reduction of up to 30% over similar pumps
• Boosts performance for up to 2 basic bathroom suites
• Inlet connection washers with integral filters.
  
• 115 Litres (25 gallon) cold water tank capacity recommended.
  
• Pump required 280volt AC supply fused at 3amps via a double pole isolator with contact gap of at least 3mm.
  
• Pump fitted with mains supply cable.
  
• Pump must be protected by a 30Ma RCD (residual Current Device).
  
• For optimum performance pump should have dedicated hot and cold water supplies direct from cold water tank and hot water cylinder
  
• Under no circumstances should the pump be connected to mains water supply or to a combination boiler
  
• Guarantee: 2 years covering manufacturing faults
  
• Compliance:
  
• WRAS, BEAB-EMC, BEAB Safety

Availability | See more Bristan products | See more Shower Pumps